Rectangular ducts or mounting straps are not designed to move solids in air; instead, they are only utilized to deliver air to the building or extract it from there. Galvanized steel sheet is one possible material for the items.

A rectangular duct costs a little bit more due to insulation, support, and labour because it contains around 32% more sheet metal (likely galvanized steel). Additionally, they might be manufactured of fibre glass board.

So, under what conditions might rectangular ducting or mounting straps be used?

Rectangular ducts or Mounting Straps are required anytime there is a little space that won’t support the height of circular ducts, as was previously noted. These square or rectangular air ducts also address the problem of the unsightly connection between the main duct and the fan coil.

• Less space is required
• A fan coil is simply connected to the main duct.
• Better for systems with low pressure
• For some exposed ducting settings, such as warehouses, lofts, and bars, rectangular or square duct work may also look nicer.

The most typical duct type used in commercial construction is the rectangular duct. Depending on whether the duct is constructed in L sections (2 piece duct) or as full wrap duct, there are two connections for rectangular duct: a transverse (end to end) connection and a longitudinal connection, either one or two (1 piece duct).

Here’s a guideline from The Best Mounting Strap Manufacturer in India, who also supplies worldwide. If you’re having trouble comprehending the distinction between the transverse seam and the longitudinal seam. The longitudinal side would be the height, and the transverse connection would be the breadth, if the duct were to be placed on the floor with the opening towards the ceiling. Another approach to keep this in mind is to visualize the longitudinal seam as being the one that follows the airflow’s path.

The length of a duct can vary based on the contractor’s access to fabrication tools. The cost of fabrication can be decreased for those sheet metal fabrication firms that have a coil line where sheet metal is received from the manufacturer in sizable coils of different gauges (thickness). For further information, you can contact our experts at INDGIRKA.

Round and rectangular ducts can both be employed. Where such a solution is required, rectangular ducts or mounting straps frequently allow for a substantially lower system height. It is challenging to create round ducts because rectangular ducts can be created with a pretty big cross-sectional area as well. The producer commits to producing ducts that adhere to the standards’ specifications for high levels of tightness, longevity, and installation simplicity. You may save money on labour costs by installing duct systems quickly, conveniently, and easily; thus, we always advise buying products that are already assembled. The LST EN 1505 “Ventilation for Buildings” standard is used in the production of rectangular parts. rectangular sheet metal ducts and fittings with the dimensions “as specified by the standard.”

The duct system’s components are appropriate for low- and medium-pressure systems. reinforced sheet metal that has been formed into every component. The components are built from stainless steel sheets if a high level of corrosion resistance is required. The change in pressure and its size have a significant impact on the rectangular system. The rectangular system’s ducts and components are less pressure-resistant, and the majority of its components are made by adding internal stiffeners for reinforcement. Additionally, corrugated sheet metal is used to make all rectangular ducts. The shape of the surface is improved through sheet forming, and the ducts become less flexible and more resistant to pressure variations. When pulsating flow travels through the rectangular system, the sheet’s creation can also quiet it down.

Rectangular duct work differs from round spiral ducting and fittings in that it is not typically purchased “off the shelf.” However, we have made some of the more popular pieces available for purchase online.

For a given pressure loss, the surface area of a rectangular duct can be double that of a comparable round duct. As a result, round ducts require less metal than their rectangular equivalents. Heavy gauges, greater reinforcing, and heavier, shorter sections are frequently required for rectangular duct installation.

Our ducts are high-quality, premium rectangular ducts that give the competition a run for their money. These air distribution ducts are in high demand nowadays. Quality, as the foundation of all our products, enables us to outperform the competition. We will not stop till we have outdone ourselves. Needless to say, we have set high expectations for ourselves. We provide rectangular ducts at a very affordable price and according to the client’s specifications and needs. To add to our list of advantages, we ship your products in appropriate packaging to assure their protection.

If you are new to rectangular duct work or have little experience with it, we have offered some guidance on how to join the various components together.

INDGIRKA is one of India’s major manufacturers and producers of rectangular ducts. Our mounting straps are high-quality, premium rectangular ducts that give the competition a run for their money. These air distribution ducts are in high demand nowadays.

Mounting Strap Features

• These ducts have an extremely high tensile strength.
• These are easily transportable from one location to another; they have a lengthy life; and they have a rough and sturdy build.
• Increased insulation
• They are well-designed, and they are also simple to install.
• They require far less upkeep.
• Corrosion-resistant
• Provides maximum mechanical strength

Also Read: Spacer and Outside Frame Bracket Manufacturer and Supplier

How do Find The Best Short Bearing Shaft Manufacturers in India